Doors & WIndows : Double Hung Window Repair Repair Window Weight Ropes
Quote from Article entitled Double Hung Window Repair :
The double hung windows have been used by homeowners from time to time due to their design conformity as well as their functionality. The double hung window repair is considered as a do-it-yourself project which can be done using the right tools as well as right guides. Here below are the things related to the double hung window repair. Keep reading for detail.
Get the interior stops pried and parted strip away using a flat pry bar. Get the stops removed by using a utility knife for helping the process if it has been sealed by paint.
Get the bottom sash pushed outward and then get the sash removed from the jams of the window. Get any old sash cord removed. Using a utility knife, get the cords cut for freeing the window sash from the jamb. Get the steps repeated for removing the top sash.
Next, the access panels must be opened in the jamb of the window using a screwdriver to get to the weights. Get the weights lowered carefully and then get them out of the cavity of the wall. Get the pulleys checked at the window jamb’s top for the old cord. Get all of the cords removed from the pulleys, wall cavity and weights. Get the pulley wheels sprayed using WD-40 to lubricate.
Get the old cord replaced with ¼ inch thick nylon cord or rope to get the deterioration avoided. Get the new chords placed over the each pulley’s top.
Get the cord taut pulled. Then get the cord cut off 4 inches from the top pulleys. Get the knots tied in the cord and then get them pushed into the slot in each of the sash.
Get the window’s sashes put back into their places by getting the top sashes replaced first. Get the parting strip nailed into the slot.
Get the interior tops and trim replaced. Get the stops nailed in the place. That's all about double hung window repair