Drill bit does not just make a hole. So that the hand is not tired and the results are satisfactory, there is the right way to drill bits. It requires precision drill and when to do it the right way. Each different media to be drilled, require different handling characteristics also vary for the drilling process. For example, how to drill a wall or concrete will vary with how to drill wood or iron. This time, a drill bit guide for a handheld drill the wall, both for ordinary walls or concrete walls. Select a drill with the recommended strength.
Usually drill manufacturers already have a drill in accordance with the specifications of the medium. Drill for walls generally has the “extra " power when used. This power will make the drill is not only able to rotate the drill bit but also perform movements such as hitting. However, for small diameter, you can use a drill that is not specific to the wall but the eyes of the drill should be specific to the wall. See the condition of the surface to be drilled. Touch the surface of the first wall. Check if the surface is flat or not. To the point that we will drill, should have a flat surface and no small stones attached to the stucco wall.
In order to precisely drilling point, then that point should be marked beforehand with stationery or nails. The position of the drill bit must be perpendicular to the point to be drilled. Notice how when the drill stand. The best way when the drill is to stand with the left foot is in front, while the rear right leg. In this way of drill bit guide for a handheld drill people are expected to drill in a more stable position. Note also how to hold a drill. To drill no grip on the front, you have to use both hands to hold. We should use Right hand to hold the bottom of the drill and press the power button once to drill. While the left hand to hold the top of the drill.
Popular Post This Week