Dealing with tiling project is quite difficult, you need to make sure the tiles installed properly, and once you install the tiles, you need to start the grouting process to make it perfect. Hello readers, I just done my own tile installation for my bathroom floor, it’s a hard time and right now I really need some rest. I still can’t believe I finally finish my own bathroom floor tiling job, with lack of experience about tilling it will be difficult for me to finish the job. But I just get easy method from home magazine, it shows me how to install tile and grout it.
Indeed, once you done installing the tile, you need to grout it. Tile grouting is about to finish the tile installation, by adding concrete on the spacer, you still need to clean up the remaining concrete around the tiles. There are two different concrete, pure concrete and colored concrete, a pure concrete ha natural concrete color, and colored concrete can be adjusted with any color. Both concrete powder can be suitable for grouting process, all you need to do is find out the most suitable concrete powder, the powder color should fit and suitable with the tile color.
Grouting tile floor can be done by several methods, but I’m sure you need the simple method right? For simple method, you need to use scrapper. Indeed, using the scraper, you will be able to completely load the spacer with concrete. Try to add some concrete on the edge of the scraper, then add the concrete on the spacer gently. Sometime you need to push the scraper to make sure the concrete fill inside the spacer. Once the spacer completely covered with concrete, the next step, you need to remove the remaining concrete around the tiles, make sure the concrete dry before you wash the tile with water and remove the grouts.
Popular Post This Week