Bathroom : How to Replace a Bathroom Faucet Replace Front Marble Bathroom Faucet
Quote from Article entitled How to Replace a Bathroom Faucet :
By the time when you find your bathroom faucet old and out of date, you will surely need to replace it. You can install the new bathroom faucet in no time with the right directions. The faucet is maybe a simple thing but it is indeed one of the focal points of a bathroom. Related to that fact, here below are the steps of how to replace a bathroom faucet for you who want to replace an outdated bathroom faucet or just installing the brand new one.
Before starting any work, the water supply that is routed to your faucet must be shut off first. This can be done by turning off the stop valves. These valves are located under the sink. Get it checked whether the water has stopped or not, if you find the water still runs, you will need to get the main water supply is turning off.
Now that the water supply has been stopped, the water lines will need to be removed next. This can be done by removing the arm coming which is attached to the stopper arm of the drain. Now, get the faucet taken from the sink. Next step, you can use a wrench which is designed for basin. For lifting up the faucet you will need to get rid of the washers as well as the nuts before.
Now it is time to get the brand new faucet installed into the place. There are some of these faucets which are available with gaskets while some others are not. You can use caulk for solving this kind of problem. You must make the faucet sealed well, and you have to make sure for that. The basin wrench once again can get this kind of task done. And finally the drain as well as the water lines which are routed to the new faucet can now be replaced. Before getting it connected, you will need to apply the plumber’s putty. Apply these plumbers at the drain. Check it if there is no leak occurring. And now, you've done a good work on replacing bathroom faucet.