Please note that this article is only for the installation of electrical installations of how to wire a light fixture in homes and places of installation only on top of / under the roof. Then we go into how to set it up. When electricity at home is still switched on / hop on over to the ( area under roof ) while carrying test-pen and look where the wires are positive , negative and ground , wear rubber footwear is dry in order to avoid the danger of shock stun .
Having in mind that where the positive cable , and ground negative turn off the flow of electricity in the home by moving from a position on the MCB switch ( 1 ) to the off position ( 0 ) and then bring all the equipment and materials to the top of the house and start stringing . Install combination on wood plafond near where the cord exits the pipe positive / phase / foe of the MCB, negative / neutral, grounding / grounding and outlet or switch, the point position is where we make combination cable connection. Input cable (positive/ phase / foe of MCB, negative / neutral, grounding / grounding) and NYM cable into the hole and then peeled cover combination of each cable with copper wire until it looks roughly 2cm long. NYM cable connect us with cable (positive / phase / foe of the MCB, negative / neutral, grounding / grounding) according to color each, and then close all the connections with insulation and enter into the last combination install cover of combination.
Expand and sort combination installation of cables follow the path by following the installation of track spikes combination then attach the clamps on the cable and plugged into the wood plafond with 50cm distance between the clamps. Insert the wires into the holes combination, the existing wiring inside / middle combination should be increased to facilitate the work when connected with a cable cord outlet or switch. Keep massaging until all combination cord passes. The last step of how to wire a light fixture; cut the wires at the last combination passed.
Popular Post This Week