Bathroom : Ways to Install a Bathroom Sink How To Install A Bathroom Sink Proper Intallation
Quote from Article entitled Ways to Install a Bathroom Sink :
Worn out or out dated bathroom sink must be replaced. But doing it in rush is not a wise thing since the result may be not optimal. Replacing the old bathroom sink itself will surely give a fresh look to the bathroom. Too many errors will make the surrounding countertops as well as flooring damaged. Therefore we must do the installation carefully and patiently. So, if you are doing the same thing now, here below are the things related to the topic of how to install a bathroom sink. Keep reading for the detailed information.
Firstly you must get tan outline on the counter top traced. This can be done by using the sink manufacturers cut out. Later, this is going to be the area where the sink will be cut out. If there is no cutout provided, make it on your own. Now that you have done the first step, you must make a hole as the starter hole using a saw & then get the traced line cut. Be sure you do not let it hitting the floor by diligently supporting it.
Now you have stepped on the third step which is putting a plumber’s putty drop on the washers & drain assembly. Get the drain plumbing attached to the water plumbing by tightening the locking nut. Get the new faucet installed at the mark which has been made before in the sink. Then get a silicone adhesive line run under the sink bottom edge. Get the sink aligned with the cut out front edge in the counter of the bathroom. Get it pressed gently to get the seal set. Then finally get it caulked and smoothed the caulk using a wet finger. Be sure you do the steps carefully and good luck folks!